partners in packaging
Plastic strapping machine
  • Easy to operate
  • Economical
  • Portable
A low cost, entry level strapping system from Signode
Unit of Measure


Simple Operation

N/A The TableTyer is easy to set up and operate:

1. Select the strap length and tension on the control panel
2. Place strap around the package, and re-insert the strap end into the machine. The TableTyer automatically removes the slack by pulling the desired tension and joins the strap ends with a secure heat weld. The system automatically feeds another length of strap for the next package or bundle.

Low Maintenance

N/A Built with few wearing parts, the TableTyer requires very little maintenance. The 24 VDC motor runs only when the machine is cycling. The heater is "stepped down" to 24 VAC to prolong the life of the heat knife.


N/A The TableTyer uses our inexpensive Empax™ polypropylene strapping.

Variable Tension

N/A The external tension dial can be adjusted from 2 lbs to 100 lbs.

Heat Sealing Mechanism

N/A The sensor controlled heat sealing mechanism ensures consistent, high-efficiency seals. Weld cooling time can be adjusted for proper sealing.

Flexible Design

N/A The strapping guides are adjustable to use strap sizes from 1/4" to 1/2".

Adjustable Height

N/A The table top height is adjustable from 30-3/4" to 37-1/2".

Package Stop

N/A Butting the package against the package stop helps ensure tight, straight strap application.

Internal Strapping Dispenser

N/A Conserves floor space.


N/A Four locking casters enable the machine to be positioned wherever needed.

Small Package Option

N/A Enables packages as small as 2" W x 1-1/5" H to be strapped.

Maximum Package Weight

N/A 125 lbs

Strap Tension

N/A 2-100 lbs


N/A Empax 1/4", 3/8", and 1/2" plastic strapping

Electrical Requirements

N/A 120 V,1 Ph, 60 Hz

Shipping Weight

N/A 168 lbs