partners in packaging
The Auto PAC 300 Side Seal may be used as a stand alone unit with an optional roller table, or in-line with a split conveyor system. It is extremely effective when the strapping application needs to be close to the floor. In addition, the side mounted strapping head keeps dirt, dust and moisture from the product away from the strapping head. The Auto PAC 300 Side Seal is activated manually or by foot switch. The Auto PAC 300 Side Seal is also available in a fully automatic version. The fully automatic version is equipped with a power conveying system and is activated by a photocell, or it can be interfaced with an existing conveyor system.
Unit of Measure

Standard Features

Standard Features

N/A
  • Lubrication Free Strapping Head
  • The strapping head never needs lubrication.

  • Auto Feeding
  • Loading strap is automatic, activated by pressing the feed switch.

  • Jam Free Automatic Re-Feeding
  • In the event of any feeding problems, the strap is automatically re-fed into the strapping head, and the machine returns to the ready position.

  • Loop Ejection
  • Missed straps are automatically ejected from the machine, and the Auto PAC 300 Side Seal re-sets itself.

  • End of Strap Sensor
  • If the coil does not have enough strap to complete the cycle, the Auto PAC 300 Side Seal ejects the short piece, and the machine is immediately ready for a new coil.

  • Electronic Tension
  • Tension is controlled electronically, yielding consistent tension.

  • Improved Speed
  • Up to 30 cycles per minute.

  • CE Certified
  • Specifications

    Dimension

    N/A 56.3" T x 25.2" D x 68.1" H

    Package Size-Minimum

    N/A 5" W x 1 1/4" H

    Package Size-Maximum

    N/A Depends on arch size (See chart for available sizes)

    Weight

    N/A 550 lbs

    Strapping Head Height

    N/A 25.5 in

    Tension Range

    N/A 15-150 lbs

    Speed

    N/A 30 cycles per minute

    Strap Size

    N/A 3/8 - 1/2 in
    9 - 12 mm

    Core Size

    N/A 8" x 8", 9" x 8"

    Power Requirements

    N/A 220 V, Three phase, 50/60 Hz

    Available Arch Sizes

    Available Arch Sizes

    N/A