partners in packaging
The Label Mill® 3501 label printer applicator makes capabilities standard that were once custom on printer applicators. More than two dozen I/O points allow for easy integration to scales, bar-code scanners, product diverters, automatic machines, conveyor lines, remote trigger, second trigger for variable data, tamp synchronization, and indicator signals such as low label, low ribbon, printer error, batch done, and more. Selections of several standard features are easy to enter using the touch pad and large, back-lit display. The controller software is user friendly and password protected. Selectable features include batch counter, job storage of up to ten jobs, operational modes, trigger polarity, and printer status outputs. With more built-in features and capabilities than any other printer applicator on the market, the 3501 sets a new standard in printer applicators.
  • 16-Key Touch Pad
  • Large, 2-Line Display with Backlight
  • User-friendly Operating Software
  • 25 I/O Points
  • 2 Serial Ports
  • Encoder Port
  • Batch Counter
  • Job Storage of Up To 10 Jobs
  • Printer Status Outputs
  • Heavy Duty Industrial Design
  • Left and Right-Hand Models
  • Optional Hand Held Interface
  • Optional Touch Screen
  • Optional PC Interface
Tamp
  • Swing-Away Tamp Assembly for Ease of Webbing and Maintenance
Blow-On
  • Swing-Away Blow Box for Ease of Webbing and Maintenance
Corner Wrap
  • Compliant Tamp Pad
  • Heavy Duty Rotary Actuator
Adjacent Panel
  • Compliant Tamp Pad
  • Heavy Duty Rotary Actuator
Unit of Measure

Specifications

Print Speed/Rate

N/A Up to 12” per second and, depending on label and product size, approximately 60 to 80 per minute

Print Method

N/A Thermal transfer and direct thermal

Interface

N/A Centronics parallel
RS-232c Serial
Ethernet
Wireless
USB

Application Method

N/A Tamp is standard
Wipe-on, flag, blow, corner-wrap, and swing tamp are optional.

Bar Codes

N/A UPC-A, UPC-E, EAN-8, EAN-13, CODE 3912/5, CODE 128,CODABAR, MSI, 2/5, CODE 93, UPC Bookland, Matrix 2/5,POSTNET, UCC/EAN 128, PDF-417, Maxicode, Data Matrix

Bar Code Ratios

N/A 1:2, 1:3, 5:2

Interface Sensors

N/A Product sensor-photo eye/limit switch/PLC input
Auxiliary output with connector standard

Electrical

N/A 115 VAC / 60 Hz - 250 W idle, 600 running

Human Readable Fonts

N/A 12 proportional and mono-spaced fonts including OCR-A and OCR-B representations and an outline font. American and European characters, uppercase and lower case with descenders (code table 850)

Air Requirements

N/A 80 psi / 3cfm

Environment

N/A Operating 50-95° F (10-35° C)
15-85% RH, non-condensing

Label Size

N/A Minimum 1” wide x 1/2” long

General Size

N/A 25” W x 22” D x 21” H

Weight

N/A 61 lbs with u-arm

Label Roll Capacity

N/A 12” maximum outside diameter wound on a 3” I.D. core.Die-cut waste removed with minimum of 1/8” separations between labels in running direction.

Options

N/A Variety of print engines, left-hand models, alarm, upgrade for longer labels, power unwind for larger spools.