The Interpack line of carton sealers is offered exclusively through authorized distributors’ of Intertape Polymer Group. Interpack’s flagship case sealer, the USA 2024-SB is an economically priced semi-automatic, top and bottom, uniform case sealer. This unit is designed to accept your cartons in batch mode; with minimal change over time. Equipped with twin, side belt drives is ideal for processing extremely heavy, extremely light and/or unstable cartons.
The USA 2024-SB offers:
Offset Tape Heads Will Process Cases As Low As 2” Tall
Slide & Lock Upper Head Provides Rapid Case Size Set Up
“Floating” Upper Head Compensates For Compressible Overfills
Twin 1/3rd HP Gear-motors
Self Tensioning / Self Tracking Belt Drive
Top squeezers
Stainless Steel In-feed Guides
Video footage: http://www.youtube.com/watch?v=uZFOMc8TwII
The USA 2024-SB replaces:
Manual taping operations in a high volume application
Maintenance intense, out-dated equipment
Additional Case Sealer Models: Also available USA 3036-SB
Designed to handle larger, heavier cartons
Comes standard with 3” tape cartridges and 4” tall side belt drives
The Interpack line of carton sealers is offered exclusively through authorized distributors’ of Intertape Polymer Group. This side belt drive random case sealer processes a wide range of cases. Interpack’s digital pneumatic system retains the upper head position after each case; which improves throughput speed dramatically. A pneumatic infeed gate assures proper case position during processing and reduces jams.
The RSA 2024-SB offers:
Offset Tape Heads Will Process Cases As Low As 2” Tall
Easily adjustable top actuator paddle for sensing under-filled or over-filled cartons
Pneumatic Infeed Gate To Position Case For Proper Processing
Twin 1/3rd HP Gear-motors
Self Tensioning / Self Tracking Belt Drive
3 Modes of Operation
• Random top & bottom, head stays stationary after cycle for improved throughput
• Bottom seal only, top head stays in upper most position during taping cycle
• By-pass mode, with use of Pneumatic heads, will transport cartons through machine without applying tape (for cartons pre-sealed, strapped, stapled, etc.)
The RSA 2024-SB replaces:
Taping cartons at multiple locations
Use of multiple uniform carton sealers
Additional Case Sealer Models: Also available RSA 2024-TB
Designed to handle unstable cartons, proportionally taller than long
Equipped with two top belts and two bottom belts for better transport
The Loveshaw LD-Xss case sealer was designed to excel in the most sanitary sensitive industrial environments. The LD-Xss was created to meet an increasing demand for a case sealer that could remain in line while plants were being washed down. Heavy duty stainless steel design, fast/easy maintenance, easy clean design, and versatility make the LD-Xss a great value for any packaging line.
The LD-Xss offers:
Available with 2” or 3” Tape Dispensers
Large case processing capabilities
Full wash down compliance with NEMA 4 electrics available
White epoxy or stainless steel motor/gearbox
Heavy stainless steel design
Reinforced, self centering guide bars
The LD-Xss replaces:
Corroded/oxidized equipment
Non-AMI compliant equipment
Additional Case Sealer Models:
Also available LD-X
The Loveshaw LDX-RTB is the PREMIER top & bottom belt drive, random semi-automatic carton sealer on the market today. With standard belt speeds of 115 FPM or optional 155 FPM for high speed applications the LDX-RTB is designed for high volume production environments and can achieve speeds up to 40% faster than competitive systems.
Patent-pending technology allows the LDX-RTB to process both void-filled and over-stuffed cases with zero adjustments, and reliability unseen in the random case sealing market. Utilizing CaseLocker™ 60 tape cartridges, allows the case sealer to process cases at significantly higher speeds then competitive case sealers.
Purpose-built for “round the clock” applications. Simultaneous top and bottom sealing of uniform carton sizes in
batches. Simple and quick adjustment for carton size.
High quality tape dispensers
Easy and quick height adjustment
Efficient side drives
Basic Models
The T-10 is available in two standard constructions, the T-10 and the T-10 Maxi. Both models are available with
extra high pillars (see table). The T-10 is available with an electro-zinc or an 18/8 stainless steel finish. In the
stainless steel version, all external parts excl. gears, motors and aluminum parts are made of 18/8 stainless steel.
The machine is easy to clean and resistant to damp and moisture.
T-10 Maxi
A wide version of the standard T-10.Suitable in industries where large cartons are handled. In its standard version,
the T-10 Maxi is fitted with 3 7/8”(100) mm dispenser with 2 5/8” (70 mm) tape overlap.
High Quality Tape Dispensers
The thumbscrew of the tape roller hub makes tape replacement easy and, at the same time, ensures tape roller
stability during the sealing process.
Three dispenser types can be used for the T-10 series:
1 1/4” (30 mm) dispenser for tape ranging in width from 1 - 1 1/4” (25-30 mm) . The tape overlap is 2” (50 mm).
2” (50 mm) dispenser for tape ranging in width from 1 1/2 - 2” (38-50 mm). The tape overlap is either
2” (50 mm” or 2 5/8” (70 mm).
3 7/8” (100 mm) dispenser for tape ranging in width from 2 1/2 - 3 7/8” (65-100 mm). The tape overlap is 2 5/8” (70 mm).
All of SOCO SYSTEM’s dispensers are fitted with an adjustable hub brake, adjustable tape roller hub, double roller
units, knife guards etc. All the dispensers can be fitted with a monitoring system to supervise the sealing process.
Fully automatic adjustment of width and height. Easy and safe operation. Designed for the closing of random carton sizes.
High quality tape dispensers
Pillar stop for maximum efficiency
Parallel guiding system for reliable operation
Basic Models
The T-55 and the T-55 Maxi. Both models are available with high pillars for extra high cartons. The modular principle of all
SOCO products provides a range of models tailored to satisfy customer’s individual requirements.
Flexible Pack Stations
The automatic height and width adjustment makes the T-55 ideal on packaging lines where carton sizes vary, e.g. in the
dispatch department of ware houses. Two operators can work simultaneously on either side of the packaging table.
The T-55 can operate as a fully automatic top and bottom sealer provided the top flaps of the carton are closed by means
of a control label or a small piece of tape.
High Quality Tape Dispensers
The thumbscrew of the tape roller hub
makes tape replacement easy and, at
the same time, ensures tape roller
stability during the sealing process.
Three dispenser types can be used for
the T-55 series:
1 1/4” (30 mm) dispenser for tape ranging in width from 1 - 1 1/4” (25-30 mm) . The tape overlap is 2” (50 mm).
2” (50 mm) dispenser for tape ranging in width from 1 1/2 - 2” (38-50 mm). The tape overlap is either 2” (50 mm” or 2 5/8” (70 mm).
3 7/8” (100 mm) dispenser for tape ranging in width from 2 1/2 - 3 7/8” (65-100 mm). The tape overlap is 2 5/8” (70 mm).
All of SOCO SYSTEM’s dispensers are fitted with an adjustable hub brake, adjustable tape roller hub, double roller units, knife guards etc. All the dispensers can be fitted with a monitoring system to supervise the sealing process.
Legacy Model No Longer Available, Contact DVPG for Service and Support
The STAX360 is a semi-automatic, random, top and bottom case sealer. This unit is equipped with top and bottom drive belts, designed to handle most any proportioned carton.
The STAX360 offers:
2” or 3” tape cartridges
Motor Overload Protection
Standard Safety Guards
Single Mast
Removable and interchangeable tape cartridges
Top & Bottom Drive Belt System
Casters
The STAX360 replaces:
Worn out equipment
Multiple hand pack/tape stations
Additional Case Sealer Models: Also available STAX520